100% Disk Usage in Windows 10 Fixed With 14 Tricks

Got 100% disk usage in Windows 10? So your computer is hanging and freezing. Same old Windows, right? Except you’re using a brand-new Windows 10 device; you’ve only had it a few days. So just what is going on?

 

Investigating, you discover that your system drive is running at 100%. Surely this can’t be, right? Sadly, it is. The latest versions of Windows have a problem with the drives being overworked, which slows down the operating system. This issue affects both hard disk drives (HDDs) and solid-state drives (SSDs).

Several fixes are available for this, but first you need to trace the problem.

100% Disk Usage in Windows 10: Fixed!

When the error was first discovered, only a few culprits were found. But as time passes, despite the 100% disk usage error being reported to Microsoft, more causes of this bug are discovered, not fewer.

  1. Check disk performance with chkdisk
  2. Check your anti-virus software
  3. Disable Windows search
  4. Disable Superfetch service
  5. Time to disable Flash
  6. Change web browser
  7. Check Skype impact on disk usage
  8. Fix the PCI-Express firmware bug
  9. Stop Steam maxing out your PC
  10. Check diagnostic tracking
  11. Is Windows Update causing 100% disk usage?
  12. Reset your Virtual Memory
  13. Enable High Performance mode
  14. Install the latest SATA drivers

Click the link above for each possible cause of the bug to see how to fix it.

Note that even if you find a solution, a Windows Update could reset the changes you’ve made. Bookmarking this page will help you find it in future to run through the fixes again.

1. Slow Performance? Run Disk Check

This performance issue is most obvious when attempting to use Windows Search to find a file or program, and anything else that requires the drive to do some work (perhaps copying and pasting a group of files).

To establish whether it is a problem that is affecting you, when your computer next slows down press Ctrl+Alt+Del and select Task Manager.

10 Windows Task Manager Tricks You Didn’t Know 10 Windows Task Manager Tricks You Didn’t KnowIf the only time you open the Task Manager is when an application is frozen and needs to be killed, you’re overlooking some of its more powerful features.READ MORE

(Alternatively, right-click the Taskbar and select Task Manager.) Note that this may take some time to open with the drive being under strain.

100% disk usage in Windows 10

On the first tab, Processes, look for the Disk column. If you’re having problems with drive performance, this should be at 100%, and shaded red to indicate whether you have a problem or not.

14 Ways to Make Windows 10 Faster and Improve Performance 14 Ways to Make Windows 10 Faster and Improve PerformanceIt’s not hard to make Windows 10 faster. Here are several methods to improve the speed and performance of Windows 10.READ MOREProblematic sectors on your HDD can cause the 100% disk usage issue in Windows 10. However, using Windows’ built-in disk check can fix this.

Open Windows Explorer and select This PC, then identify your hard drive. Right-click on C: and select Properties. Here, find the Tools tab, and under Error checking click on Check.

In the resulting window, click Scan drive. Wait while the system scans the drive; a reboot may be required for a full disk repair. This should deal with the error.

2. Check Your Anti-Virus Software

As with any such performance issue, the first thing to do is confirm that your computer hasn’t been infected with malware. Your security software should be able to deal with this, whether it’s a free app or a paid suite.

At the very least, tools such as Malwarebytes Anti-Malware should be able to scan your system drive and detect any problems, although with a heavy load on your drive already this may take a while.

If threats are found, use the software’s recommendations to discard them and reboot. Next, check your drive’s performance further. Hopefully, you’ve resolved the issue; if not, then malware wasn’t to blame, so read on.

3. Disable Windows Search for Improved Disk Performance

The next thing to check is whether the 100% disk usage error has anything to do with Windows Search.

A bug in Windows 10 results in a “search loop” that causes an increased load on the system drive.

To stop this and prevent it from happening during your current session (until Windows is rebooted) open the Command Prompt (the quickest way is by clicking the Start button and typing cmd, then right-click and select Run as administrator) and enter:

net.exe stop "Windows search"

To permanently disable Windows Search or Indexing, press WIN+R, enter services.msc, and hit Enter. In the Services window that opens find the Windows Search entry and double-click it to open the Windows Search Properties window.

Disable Windows 10 search

Under Startup type, select Disabled. Here you can click Stop to abort the service. Click OK to save your changes.

A few moments after disabling Windows Search, your Windows 10 performance should improve considerably. If not, move on…

4. Disable Superfetch Service

Another Widows 10 feature that has been identified as a potential cause of the 100% disk usage issue is the superfetch service.

What Is Superfetch on Windows 10? And How to Disable It What Is Superfetch on Windows 10? And How to Disable ItIs the Service Host: Superfetch causing high disk usage in Windows 10? What is Superfetch and can you disable it? Let’s find out.READ MORETo deal with this, open another Command Prompt (or if you’ve still got the earlier box open, use that) and enter:

net.exe stop superfetch

Disable Superfetch service in Windows 10

Again, wait a few moments to check whether this has had any effect on your computer’s performance. You should also run Check Disk in a Command Prompt:

chkdsk.exe /f /r

You’ll be informed that your PC must be rebooted for Check Disk to complete, so make sure you have closed all your applications first.

If this doesn’t work, it is likely that you’re experiencing an iteration of this issue that is frustrating to realize, but simple to resolve.

5. Is Flash Causing the 100% Disk Usage Bug?

Flash remains one of the most vulnerable aspects of modern computing and should be disabled. Adobe plans to kill off its multimedia plugin in 2020, so there’s little reason to keep using it.

Flash also seems to be one of the most common culprits for the 100% hard disk usage in Windows 10 if you’re using the Google Chrome browser.

Open Menu > Settings > Show advanced settings and find the section marked Privacy. Here, click on Content settings and find Flash. You’ll see a toggle, so set it to Block sites from running Flash, then click Back..

Change Flash settings in Chrome

Restart the browser and check your HDD performance.

6. Use a Different Web Browser

It may not be Flash that is impacting on your browser performance.

Another cause could be the browser itself, particularly if you’re using Google Chrome.

The obvious option is to choose a different browser. Windows 10 already has two browsers built in. You probably don’t want to use internet Explorer, but Microsoft Edge is an adequate replacement for Chrome.

Several browsers are available, some better than others. See our guide to the best web browsers for Windows to find an alternative.

The Best Web Browsers for Windows The Best Web Browsers for WindowsWhat is your default web browser? Even though we’re spoiled for choice, the majority of us stick to the tried and tested major players. What are better alternatives for resource use, speed, and security?READ MORE

7. Is Skype Eating Disk Resources?

Another widely-used application could also be causing your 100% HDD usage: Skype.

To find out—and disable its OTT resource requirement, begin by checking that the software is not running. You can do this by looking in the Task Manager, or checking the System Tray, the area on your desktop around the clock. If Skype is running here, right-click the icon and select Quit.

Next, press WIN+R and paste this address into the box:

C:\Program Files (x86)\Skype\Phone\

Click OKto find the Skype.exe file and right-click this and select Properties. In the Security tab click Edit, then select ALL APPLICATION PACKAGES.

Manage Skype permissions

Put a check next to Write in the Allow column and finish off by clicking Apply, then OK. Head back to the Task Manager to see the change. You may also consider finding a Skype alternative.

6 Free Skype Alternatives for the Windows Desktop 6 Free Skype Alternatives for the Windows DesktopHave you had enough of Skype? This group and video chat messenger has tough competition. Here are six free services that can replace Skype for you.READ MORENo difference? Keep reading…

8. Resolve PCI-Express Firmware Bug

Some drivers don’t run quite as they should in Windows 10. One that has been discovered to be causing 100% HDD use is the StorAHCI.sys driver, which has a firmware bug. StorAHCI.sys intended for storage devices connected to the PC or laptop motherboard via Advanced Host Controller Interface PCI-Express.

If you’ve made it this far with no success, this could be the problem.

Open the Device Manager (use Windows 10 search, or right-click This PC in Windows Explorer, then Properties > Device Manager) and expand IDE ATA/ATAPI Controllers. If an AHCI Controller entry is listed, double-click, then open the Driver tab and select Driver Details.

Is the driver listed as C:\Windows\system32\DRIVERS\storahci.sys? If so, you could be affected by this bug.

Close the driver details box and switch to the Details tab, selecting Device instance path from the drop-down menu. Where the Value is listed, right-click, and select Copy. Launch your text editor (like Notepad) and Paste the contents in.

Next, press WIN+R and type regedit, followed by the OK button. Navigate to this address: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ and use the pasted string above to open the correct AHCI Controller, followed by the random number.

Fix the PCI-Express firmware bug

Here, expand Device Parameters\Interrupt Management\MessageSignaledInterruptProperties and you should see MSISupported listed in the right-hand pane. Double-click this, then change the Value data: to 0. Click OK to confirm and follow the instructions to restart Windows.

9. Is Steam Maxing Out Your HDD?

Enjoy gaming and have Steam installed? There’s a good chance this digital delivery system is causing 100% disk usage.

Usually this is due to update delivery, causing the background downloader to get caught in a loop. Clear the Steam cache to fix this.

First, make sure you have exited Steam. Where Steam is a likely cause of the 100% disk usage error, it may hang when you try to exit. In this case, use the Windows 10 Task Manager to close the software.

Next, open the WIN+R run box and enter

steam://flushconfig

You’ll see a dialogue box, informing you that content will be deleted.

Clear the Steam cache

Click OK to proceed.

Note that games and saves will be retained, so there is no risk of them being deleted.

10. Disable Diagnostic Tracking in Windows 10

Finally, it’s worth considering the impact of diagnostic tracking in Windows 10. A feature that you might have otherwise disabled for privacy reasons, it has been blamed for 100% HDD use on many PCs.

13 Windows Diagnostics Tools to Check Your PC’s Health 13 Windows Diagnostics Tools to Check Your PC’s HealthUse these computer diagnostic tools to run a PC health check and fix issues. Some support Windows 10 diagnostics, specifically.READ MOREWhen it comes to reducing your hard disk drive usage, it’s quicker to simply disable the DiagTrack service. If this is the source of the 100% disk usage error in Windows 10, you can stop the service launching.

However, to do this you’ll need to access Command Prompt in administrator mode.

Do this by clicking Start and typing cmd in the search box. Wait for the results and right-click Command Prompt, selecting Run as administrator.

Right-click the Start button and select Command Prompt (Admin), then input these commands to disable and stop DiagTrack:

sc config "DiagTrack" start= disabled
sc stop "DiagTrack"

Disable diagnostic tracking in Windows 10

In addition, you might also head to Settings > System > Notification & actions and disable Get tips, tricks and suggestions as you use Windows. Doing so has been shown to improve things.

11. Windows Update Can Cause High Disk Usage

As well as affecting changes you make to your PC when fixing the 100% disk use problem, Windows Update can also be a cause.

This usually only happens when Windows Update has a problem (which is typically due to a file refusing to download). You have two options here:

  1. Leave your computer alone—shut all your open applications and wait. Eventually, the files will download, but depending on how Windows Update is scheduled on your computer, it may require a reboot.
  2. Shutdown your computer—once you’ve done that, restart and wait for Windows Update to resolve the problem.

Once the update has finished downloading, it’s wise to run it as soon as possible. Remember to check any previous fixes for 100% disk usage before proceeding; as noted above, Windows Update can reverse these fixes.

How to Resolve Windows Update Problems in 5 Easy Steps How to Resolve Windows Update Problems in 5 Easy StepsHas Windows Update failed you? Maybe the download got stuck or the update refused to install. We’ll show you how to fix the most common issues with Windows Update in Windows 10.READ MORE

12. Reset Your Virtual Memory

Virtual memory is a combination of RAM and hard disk space and can be responsible for overuse of your HDD. If there isn’t enough RAM to perform a task, the HDD is used to supplement the RAM. Data moved to the HDD is then returned to RAM when required.

Is Your Virtual Memory Too Low? Here’s How to Fix It! Is Your Virtual Memory Too Low? Here’s How to Fix It!Computer memory issues can slow down your computer over time. Here’s how to set the virtual memory size and boost performance.READ MOREIf you’ve made it this far and you’ve yet to solve the 100% disk usage issue, it could be worth resetting your virtual memory.

Open the System screen with Windows+Break/Pause, then Advanced System Settings on the left. In the resulting box, select the Advanced tab, then under Performance click Settings.

Here you’ll find another Advanced tab, which has a section labeled Virtual memory. Click Change and clear the checkbox for Automatically manage paging file size for all drives.

Reset Windows 10 virtual memory

Staying on this screen, select your Windows drive (usually C:) and then Custom size. Here, add an Initial size and a Maximum size; note both are measured in MB rather than GB.

These numbers can be confusing, so with the first value, rely on the recommended option. For the maximum value, aim for a figure no more than 1.5 times your system RAM.

Everything You Need to Know About RAM & Memory Management Everything You Need to Know About RAM & Memory ManagementRAM is your computer’s short term memory. Hence, memory management has a significant impact on system performance. Here we explain how RAM works and whether you can do anything to increase its efficiency.READ MOREFor instance, a computer with 4GB of RAM should have no more than 6.5GB (6144MB).

With the values input, click Set, then OK to continue. You now need to clear the temporary files that have been used in the previous virtual memory allocation.

Do this by opening the Run box (WIN+R) then entering “temp”. When the temp directory opens, select all files (Ctrl+A) and tap Delete on your keyboard.

13. Activate High Performance Mode

One final thing to try is altering your Windows power settings. Standard power modes are more prone to the 100% disk usage bug but switching to high performance often overcomes the problem.

The downside, of course, is that your computer will use more power. Thanks to modern processor design this shouldn’t be a massive issue. However, notebooks and desktop replacement laptops may take a hit on battery life.

To change to high performance, open the Power & sleep screen with WIN+X > Power Options.

Speed Up Windows With 10 Tricks and Hacks Speed Up Windows With 10 Tricks and HacksLooking to speed up your computer without spending a lot of time? Here are 10 tweaks to make Windows faster that take 10 minutes or less.READ MOREHere, click Additional power settings, select High performance, then OK.

Create a new power plan in Windows 10

If this isn’t a displayed option, you’ll need to create your own custom power plan. Click Create a power plan, then choose High performance. Give the plan a name, tweak any personal settings you need then select it as a power plan to use.

In a moment or two, the 100% disk usage issue should drop down to less than 10%.

14. Install the Latest SATA Drivers

Could a storage device driver be resulting in the 100% disk usage error?

Your Windows 10 computer almost certainly uses SATA connections for hard drives, SSDs, and optical drives. If the drivers aren’t up to date, the disk usage error can occur.

Avoid this by upgrading to the latest SATA drivers.

Open the Power User menu with WIN+X and select Device Manager. From here, expand Storage controllers, then identify the correct controller for your SATA devices. If you can’t do this, don’t worry—simply update both.

To update, right-click on each controller and select Update driver.

Update Windows 10 SATA drivers

Select the Browse my computer for driver software option, then Let me pick from a list of available drivers on my computer. Here, choose Standard AHCI Controller and see how this impacts performance.

You may need to reboot Windows for this to take effect. Note that if it doesn’t work, you can still try this by checking the manufacturer’s website for a new driver. This can be installed using the instructions that accompany it.

Disk Usage Should Rarely Be 100%

Put simply, there is little reason for your disk load to be anything close to 100%, certainly not under normal usage. A slow computer is one with a problem, and if you cannot fix it by disabling a browser plugin, stopping services, or running your antivirus software, then the problem may well be hardware related.

Perhaps your drive is getting old; it may be defective, or the cables may need replacing. Alternatively, there is a chance that the problem is connected to the Windows defrag tool.

If your computer is attempting to defrag your drive, but your HDD is actually an SSD, then serious problems can occur. Deal with this by opening the Task Scheduler (WIN+Q, enter “task scheduler”) and disable any scheduled disk defrag tasks.

Try these fixes the next time your Windows computer slows down. Be sure to check your Windows Experience Index periodically to identify performance issues in need of immediate resolution. And add these fixes to your skill set for solving annoying Windows issues:

8 Annoying Windows 10 Issues & How to Fix Them 8 Annoying Windows 10 Issues & How to Fix ThemThe upgrade to Windows 10 has been smooth for most, but some users will always encounter issues. Whether it’s a flashing screen, network connectivity issues, or battery drain, it’s time to resolve these problems.

About Foozieh

Avatar

Leave a Reply

Your email address will not be published. Required fields are marked *

*

code

13 − 11 =

 

Enter your email address: